page_head_bg

Lihlahisoa

GI-S40 Series 40mm Housing Solid Shaft Keketseho Encoder

tlhaloso e khuts'oane:

GIS-40Series incremental encoder ke mokhoa o bonolo oa ho kenya, oa ho kenya khokahanyo o ntseng o eketseha o nang le likhetho tsa NPN/PNP pokello e bulehileng, Push pull, Line Driver outputs le qeto e atolositsoeng ho fihla ho 10000ppr;GIS-40Encoder e ntseng e eketseha ke matlo a 38mm, encoder e nyane, e ka laola basebelisi ba e kenya sebakeng se lekanyelitsoeng;The gearing ea encoder e tsoa ho NMB, e ka nolofalletsa motsamao oa encoder ka thelelo le bophelo bo bolelele.

 


  • Dia ya Matlo.:40 limilimithara
  • Shaft Dia.:6mm
  • Qeto:Max.10000ppr
  • Phepelo ea Voltage:5v,8-29v;
  • Sebopeho sa Output:NPN/PNP mokelli ea bulehileng, Push pull, Line Driver;
  • Lets'oao la Tlhahiso:AB / ABZ / ABZ & A- B- Z-;
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    GIS-40 Series Solid Shaft Incremental Rotary Encoder

    Mabapi le Encoder ea Keketso

    Li-encoder tse ntseng li eketseha tsa rotary li hlahisa letšoao nako le nako ha shaft e potoloha lehlakoreng le itseng.Palo ea matšoao (pulses) ka nako e hlalosang qeto ea sesebelisoa.

    Ntle le ho latela maemo, li-encoder tse ntseng li eketseha hangata li sebelisoa ho tseba lebelo.Boemo bo amanang le sebaka sa ho qala bo ka baloa ka ho bala palo ea likhahla.Lebelo le ka khutlisoa ka ho arola palo ea likhahla ka nako e lekantsoeng ea nako.

    Encoder e eketsang bonyane e na le lets'oao le le leng "A" kapa hangata mats'oao a 2 a tsoang, a bitsoang "A" le "B".Matshwao ana a 2 a hlophiswa ka 90° offset, e hlokehang bakeng sa ho lemoha ho potoloha ha encoder.Ka ho fetola encoder ho ea ka nako, lebelo la "A" le nyoloha ka 90 ° ka pele ho "B", ka ho fetola shaft ho ea ka nako, "B" pulse e phahama ka pele ho "A" pulse.

    Ntle le moo, li-encoder tse ling tse ntseng li eketseha li hlahisa lets'oao la "Z".Hang ha ho potoloha ho hong le ho hong, lets'oao lena la Z le nyoloha ka 90 °, sebakeng se ts'oanang.Sena se ka sebelisoa e le ntlha e nepahetseng ea litšupiso.

    Likhoutu tse ling tse ntseng li eketseha le tsona li na le matšoao a fapaneng a fapaneng, a bitsoang "/A", "/B" le "/Z".Matshwao ana a fetotswe matshwao a “A”, “B” le “Z”.Balaoli ba ka bapisa para ka 'ngoe ("A" e tlameha ho lekana le inverted "/A") ho netefatsa hore ha ho na phoso nakong ea phetisetso.

    GIS-40Series incremental encoder ke mokhoa o bonolo oa ho kenya, oa ho kenya khokahanyo o ntseng o eketseha o nang le likhetho tsa NPN/PNP pokello e bulehileng, Push pull, Line Driver outputs le qeto e atolositsoeng ho fihla ho 10000ppr;

    GIS-40 Encoder e ntseng e eketsehake matlo a 38mm, encoder ea boholo bo nyane, e ka laola basebelisi ba e kenya sebakeng se lekanyelitsoeng;The gearing ea encoder e tsoa ho NMB, e ka nolofalletsa motsamao oa encoder ka thelelo le bophelo bo bolelele.

    GIS-40Series incremental encoder e ka fana ka pina e le 1, A/B tse 2, A/B/Z tse 3, le li-singals tse 6 A/B/Z/A-/B-/Z- bakeng sa TTL(Line Driver Output), hape bareki ba bang ba hloka 6singnals bakeng sa tlhahiso ea HTL (Push Pull)

    GIS-40Series encoder e eketsang li lekana le OmronEncoder e ntseng e eketsehaSehlopha sa E6B2(E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6B2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,E6B2-CWZ3E, E6B2-CBZ5C;);Koyo incremental TRD-2T Series, Automics ES40 Series incremental encoder.

    Setifikeiti: CE, ROHS, KC, ISO9001

    Nako ea ho etella pele:Nakong ea beke ka mor'a tefo e feletseng;Ho tsamaisoa ke DHL kapa tse ling joalo ka ha ho boletsoe;

    Likaroloana:

    ▶Bokahare ba Matlo: 38mm;

    ▶Bokahare ba Shaft e tiileng: 6mm;

    ▶Qeto: Max.10000ppr;

    ▶Supply Voltage: 5v,8-29v;

    ▶Output Format: NPN/PNP e bulehileng pokello, Push pull, Line Driver;

    ▶ Letšoao la Sephetho: AB / ABZ / ABZ & A- B- Z-;

    ▶ E sebelisoa haholo mafapheng a fapaneng a taolo ea boiketsetso le sistimi ea litekanyo, joalo ka ho etsa mechini, ho tsamaisa thepa, masela, khatiso, sefofane, mochini oa liteko oa indasteri ea sesole, lifti, jj.

    ▶Ha e thothomele, e hana ho bola, e thibela tšilafalo;

    Litšobotsi tsa sehlahisoa
    MatloDia.: 38 limilimithara
    Solid Shaft Dia.: 6mm
    Lintlha tsa Motlakase
    Qeto: Max.10000ppr
    Sebopeho sa Output: Pokelli e bulehileng ea NPN/PNP, Push pull, Line Driver, Voltage Output;
    Lets'oao la Tlhahiso: A/AB / ABZ / ABZ & A- B- Z-;
    Phepelo ea Voltage: 5V, 8-29V
    Max.Karabelo ea khafetsa 300Khz
     

    Open Collector

    Phallo ea motlakase

    Mokhanni oa Line

    Sututsa Hula

    Ts'ebeliso ea hona joale 80mA; 80mA; 150mA; 80mA;
    Laola hona joale 40mA; 40mA; 60mA; 40mA;
    VOH Min.Vcc x 70%; Min.Vcc - 2,5v Min.3.4v Min.Vcc - 1,5v
    TLHOKOMELO Max.0.4v Max.0.4v Max.0.4v Max.0.8v
    Mechini Lintlha
    Qala Torque 4 x 10-3 NM
    Max.Shaft Loading Axial: 20N, Radial:10N;
    Max.Lebelo la Rotary 5000rpm
    Boima ba 'mele 160g
    Lintlha tsa Tikoloho
    Nako ea ho sebetsa. -30 ~ 80℃
    Mocheso oa polokelo. -40 ~ 80 ℃
    Mophato wa Tshireletso IP54

     Sebopeho sa Wave

    微信图片_20200129233123

     Potoloho ea Pontšo ea Poelo

    微信图片_20200129233031

    Khoutu ea ho Odara

    微信图片_20210125091103

    Litekanyo

     

    微信图片_20200214105027

    Mehato e mehlano e u tsebisa mokhoa oa ho khetha encoder ea hau:
    1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
    2.Haeba u batla ho fumana sekhouto bakeng sa ts'ebeliso ea hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
    3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e ntseng e eketseha) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
    5. Khetha ea matlo Dia le shaft dia.ea encoder;Gertecgke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

    Sebaka sa Gertech Equivalent:
    Omron:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
    Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series

    Lintlha tsa Sephutheloana
    Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;

    LBH:
    1) U ka khetha encoder joang?
    Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
    Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
    2) Litlhaloso ke life reque/sted pele o laela encoder?
    Mofuta oa encoder——————-solid shaft kapasekoti sa shaft sekoti
    Bophara ba ka Ntle———-Min 25mm, MAX 100mm
    Shaft Diameter————— Shaft e Min 4mm, Max shaft 45mm
    Mohato le Qeto———Min 20ppr, MAX 65536ppr
    Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
    Matla a Phepelo ea Matla——DC5V-30V
    3) U ka khetha encoder e nepahetseng joang u le mong?
    Hantle-ntle Tlhaloso
    Sheba The Installation Dimensions
    Ikopanye le Supplier ho fumana lintlha tse ling
    4) Ho qala likotoana tse kae?
    MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
    5) Hobaneng u khetha "Gertech” Brand Encoder?
    Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004,'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa kantle ho naha ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
    6) Nako ea hau ea ho etella pele e telele hakae?
    Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
    7) leano la hau la tiisetso ke eng?
    Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
    8) Melemo ke efe ha re ka ba setsi sa hau?
    Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
    9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
    Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
    10) Bokhoni ba hau ba tlhahiso ke bofe?
    Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha ​​​​mohala oa tlhahiso ea poleloana ea bobeli.


  • E fetileng:
  • E 'ngoe: