page_head_bg

Lihlahisoa

GS-SVZ48 Series Servo Motor Encoder

tlhaloso e khuts'oane:

Tšebeliso ea ka hare ea lisebelisoa tsa ASIC, botšepehi bo phahameng, bophelo bo bolelele, bo matla bo khahlanong le ho kena-kenana.The taper shaft e etselitsoe hore e be bonolo ho thella, e nang le molumo o monyenyane oa ho kenya, sebaka se pharaletseng sa tharollo, ha ho na taolo ea matšoao e hlokehang, ka ABZUVW tse tšeletseng tse hlahisoang ke pontšo ea mocha, e ka kopanngoang le drive line drive (26LS31) RS422, e ka fana ka matšoao a 12 a tlhahiso, a lumellanang le TTL;

  • Dia ya Matlo.:48mm
  • Shaft Dia.:09mm(Taper:1:10)
  • Phepelo ea Voltage:5v,8-30v
  • Qeto:1000,1024,1250,2000,2048, 2500,4000,4096ppr
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    GS-SVZ48 Series Servo Motor Encoder
    Karolo ea encoder mochining oa servo

    E ela hloko motsamao oa mochini oa shaft ea actuator — phetoho ea boemo le sekhahla sa phetoho.E fetolela mokhoa oa ho kenya letsoho hore e be tšusumetso ea motlakase 'me e fetise letoto la litšusumetso tse joalo ka lets'oao la quadrature ho selaoli.

    E sebelisoa haholo ho othomathike ea taolo ea fifield joalo ka AC servo unit, haholo-holo e loketseng ho bapisa le servo motor.

    Servo motor, ka tlhaloso, e tlas'a taolo ea loop e koetsoeng.Lentsoe "close-loop control" le bolela ntho e lekanyang ntho e 'ngoe (bongata, joalo ka boemo kapa lebelo kapa ho potoloha ha angular) e ka fetohang, ebe e bolella komporo seo e se lekantseng.Ka mor'a moo, k'homphieutha e bolella enjene ho ea pele kapa morao ho theha boitšoaro bo lakatsehang (bo neng bo reriloe esale pele) bo ipapisitse le tekanyo e tlalehiloeng ho eona.

    Kahoo encoder ke mohlala oa 'ntho e lekantseng ntho e ngoe'.Sekhouda ka botekgeniki ke lentsoe le akaretsang le bolelang 'ntho e khoute (ho lekanya) ntho e' ngoe'.Tabeng ea li-motors tsa servo tse phahameng, hangata li bua ka li-encoder tsa optical (mofuta oa li-disc).Li-servos tsa toy li sebelisa potentiometer e bonolo, 'me li-servo motors tsa boleng bo holimo/liindasteri li sebelisa lisensara tsa holo (har'a lintho tse ling).

    Kahoo, re hloka li-encoder tsa servo motors ho fana ka tekanyo ho molaoli (k'homphieutha) e le hore e ka lokisa boitšoaro leha e le bofe bo sa rateheng.

    Tšebeliso ea ka hare ea lisebelisoa tsa ASIC, botšepehi bo phahameng, bophelo bo bolelele, bo matla bo khahlanong le ho kena-kenana.The taper shaft e etselitsoe hore e be bonolo ho thella, e nang le molumo o monyenyane oa ho kenya, sebaka se pharaletseng sa tharollo, ha ho na taolo ea matšoao e hlokehang, ka ABZUVW tse tšeletseng tse hlahisoang ke pontšo ea mocha, e ka kopanngoang le drive line drive (26LS31) RS422, e ka fana ka matšoao a 12 a tlhahiso, a lumellanang le TTL;
    Bolulo Dia.:48mm, Shaft:09mm(Taper:1:10);
    Matla a phepelo: 5v,5-26v;
    Qeto:1000,1024,1250,2000,2048, 2500,4000,4096;
    Mecha ea lihlahisoa: likanale tsa 2 AB;
    Letšoao la Boemo ba Zero: S= Ha ho mocha oa Z;M= ka tlhahiso ea Z Signal "1";N=ka tlhahiso ea Z Signal "0" ;
    Sebopeho sa Output: T=Motlakase oa Motlakase NPN+R;C=NPN Open Collector;CP=PNP Open Collector;
    P=Push Pull L=Mokhanni oa Line(26L31) K=Mokhanni oa Line(7272) V=Mokhanni oa Line OC(7273)
    Palo: 2P = lipara tse 2 tsa Lipalo;3P=3 Lipara tsa Lipalo;5P=5 Lipara tsa Lipalo

    Mehato e mehlano e u tsebisa mokhoa oa ho khetha encoder ea hau:
    1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
    2.Haeba u batla ho fumana sekhouto bakeng sa ts'ebeliso ea hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
    3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e ntseng e eketseha) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
    5. Khetha ea matlo Dia le shaft dia.ea encoder;
    Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

     

    Sebaka sa Gertech Equivalent:
    Omron:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
    Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series

     

    Lintlha tsa Sephutheloana
    Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;

     

    LBH:
    1) U ka khetha encoder joang?
    Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
    Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
    2) Litlhaloso ke life reque/sted pele o laela encoder?
    Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
    Bophara ba ka Ntle———-Min 25mm, MAX 100mm
    Shaft Diameter————— Shaft e Min 4mm, Max shaft 45mm
    Mohato le Qeto———Min 20ppr, MAX 65536ppr
    Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
    Matla a Phepelo ea Matla——DC5V-30V
    3) U ka khetha encoder e nepahetseng joang u le mong?
    Hantle-ntle Tlhaloso
    Sheba The Installation Dimensions
    Ikopanye le Supplier ho fumana lintlha tse ling
    4) Ho qala likotoana tse kae?
    MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
    5) Hobaneng u khetha "Gertech” Brand Encoder?
    Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
    6) Nako ea hau ea ho etella pele e telele hakae?
    Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
    7) leano la hau la tiisetso ke eng?
    Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
    8) Melemo ke efe ha re ka ba setsi sa hau?
    Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
    9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
    Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
    10) Bokhoni ba hau ba tlhahiso ke bofe?
    Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha ​​​​mohala oa tlhahiso ea poleloana ea bobeli.


  • E fetileng:
  • E 'ngoe: