page_head_bg

Lihlahisoa

GSA-PL Series, Single Turn Parallel Absolute Encoder

tlhaloso e khuts'oane:

GSA-PL Series parallel single turn absolute encoder e loketse mefuta e mengata e fapaneng ea lits'ebetso tsa indasteri tse hlokang encoder e nang le bokhoni ba ho hlahisa boemo bo felletseng.Theknoloji ea eona ea tlhahiso ea dijithale ka botlalo e e etsa khetho e ntle bakeng sa lits'ebetso tsohle, haholo tse nang le lerata le phahameng.E fumaneha ka servo e chitja kapa sekoere sa flange, le mefuta e fapaneng ea sehokelo le likhetho tsa cabling, GSA-PL Series e entsoe habonolo hore e be litlhoko tse fapaneng tsa kopo.Ka khetho ea eona e pharaletseng ea boholo ba shaft e tšehetsoeng ke boemo ba indasteri, li-bearings tsa NMB, le tiiso ea IP67 ea boikhethelo, e loketse libaka tse thata.Housing Dia.:38,50,58mm;Solid/hollow Shaft Diameter:6,8,10mm;Qeto:Max.16bits Interface: Parallel;Khoutu ea Output: Binary, Gray, Gray Excess, BCD;


  • ▶ Diameter ea Bolulo:38,50,58mm;
  • ▶Bokahare ba Shaft e tiileng/e sekoti:6,8,10mm;
  • ▶ Qeto:Max.16bits;
  • ▶Supply Voltage:5v,8-29v;
  • ▶ Sefahleho:Phapang
  • ▶Output Code:Binary, Gray, Gray Excess, BCD;
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    GSA-PL Series, Single Turn Parallel Absolute Encoder

    GSA-PL Series parallel single turn absolute encoder e loketse mefuta e mengata e fapaneng ea lits'ebetso tsa indasteri tse hlokang encoder e nang le bokhoni ba ho hlahisa boemo bo felletseng.Theknoloji ea eona ea tlhahiso ea dijithale ka botlalo e e etsa khetho e ntle bakeng sa lits'ebetso tsohle, haholo tse nang le lerata le phahameng.E fumaneha ka servo e chitja kapa sekoere sa flange, le mefuta e fapaneng ea sehokelo le likhetho tsa cabling, GSA-PL Series e entsoe habonolo hore e be litlhoko tse fapaneng tsa kopo.Ka khetho ea eona e pharaletseng ea boholo ba shaft e tšehetsoeng ke boemo ba indasteri, li-bearings tsa NMB, le tiiso ea IP67 ea boikhethelo, e loketse libaka tse thata.Housing Dia.:38,50,58mm;Solid/hollow Shaft Diameter:6,8,10mm;Qeto:Max.16bits Interface: Parallel;Khoutu ea Output: Binary, Gray, Gray Excess, BCD;

    Setifikeiti: CE, ROHS, KC, ISO9001

    Nako ea ho etella pele:Nakong ea beke ka mor'a tefo e feletseng;Ho tsamaisoa ke DHL kapa tse ling joalo ka ha ho boletsoe;

    ▶Bokahare ba Matlo: 38,50,58mm;

    ▶Bokahare ba Shaft e tiileng/e sekoti:6,8,10mm;

    ▶ Sehokahanyi: Ho bapana;

    ▶Qeto: Max.16bits;

    ▶Supply Voltage: 5v,8-29v;

    ▶Output Code: Binary, Gray, Gray Excess, BCD;

    ▶ E sebelisoa haholo mafapheng a fapaneng a taolo ea boiketsetso le sistimi ea litekanyo, joalo ka ho etsa mechini, ho tsamaisa thepa, masela, khatiso, sefofane, mochini oa liteko oa indasteri ea sesole, lifti, jj.

    ▶Ha e thothomele, e hana ho bola, e thibela tšilafalo;

    Litšobotsi tsa sehlahisoa
    Dia ya Matlo.: 58 limilimithara
    Solid Shaft Dia.: 10 limilimithara
    Lintlha tsa Motlakase
    Qeto: Max.16bits, Single turn max.16bits, Total Max.29bits

     

    Sehokelo: Parallel/NPN/PNP mokelli ea bulehileng, Push pull, Line Driver;
    Output Code: Binary, Gray, Gray Excess, BCD
    Phepelo ea Voltage: 8-29V
    Max.Karabelo ea khafetsa 300Khz
     

    Open Collector

    Phallo ea motlakase

    Mokhanni oa Line

    Sututsa Hula

    Ts'ebeliso ea hona joale ≤80mA; ≤80mA; ≤150mA; ≤80mA;
    Laola hona joale 40mA; 40mA; 60mA; 40mA;
    VOH Min.Vcc x 70%; Min.Vcc - 2,5v Min.3.4v Min.Vcc - 1,5v
    TLHOKOMELO Max.0.4v Max.0.4v Max.0.4v Max.0.8v
    MechiniLintlha
    Qala Torque 4 x 10-3N•M
    Max.Shaft Loading Axial: 29,4N, Radial:19,6N;
    Max.Lebelo la Rotary 3000rpm
    Boima ba 'mele 160-200 g
    Lintlha tsa Tikoloho
    Nako ea ho sebetsa. -30 ~ 80 ℃
    Mocheso oa polokelo. -40 ~ 80 ℃
    Mophato wa Tshireletso IP54

     

    Moetapele oa Khokahano:
    Letshwao Vcc GND

    D0

    D1

    D2

    D3

    D4

    D5

    D6

    D7

    D8

    D9

    Mmala Brown Bosoeu

    Bokhubelu/Boputsoa

    Boputsoa/ Bopherese

    Boputsoa

    Botala

    Pinki

    Bopherese

    Bosoeu

    Hlooho

    Bosehla

    Brown

     

    Khoutu ea ho Odara

    Litekanyo

     

    Mehato e mehlano e u tsebisa mokhoa oa ho khetha encoder ea hau:
    1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
    2.Haeba u batla ho fumana sekhouto bakeng sa ts'ebeliso ea hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
    3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e ntseng e eketseha) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
    5. Khetha ea matlo Dia le shaft dia.ea encoder;
    Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

    Sebaka sa Gertech Equivalent:
    Omron:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
    Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series

    Lintlha tsa Sephutheloana
    Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;

    LBH:
    1) U ka khetha encoder joang?
    Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
    Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
    2) Litlhaloso ke life reque/sted pele o laela encoder?
    Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
    Bophara ba ka Ntle———-Min 25mm, MAX 100mm
    Shaft Diameter————— Shaft e Min 4mm, Max shaft 45mm
    Mohato le Qeto———Min 20ppr, MAX 65536ppr
    Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
    Matla a Phepelo ea Matla——DC5V-30V
    3) U ka khetha encoder e nepahetseng joang u le mong?
    Hantle-ntle Tlhaloso
    Sheba The Installation Dimensions
    Ikopanye le Supplier ho fumana lintlha tse ling
    4) Ho qala likotoana tse kae?
    MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
    5) Hobaneng u khetha "Gertech” Brand Encoder?
    Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
    6) Nako ea hau ea ho etella pele e telele hakae?
    Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
    7) leano la hau la tiisetso ke eng?
    Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
    8) Melemo ke efe ha re ka ba setsi sa hau?
    Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
    9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
    Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
    10) Bokhoni ba hau ba tlhahiso ke bofe?
    Re hlahisa 5000pcs beke le beke.Hona joale re haha ​​poleloana ea bobeli tlhahiso ea li


  • E fetileng:
  • E 'ngoe: