page_head_bg

Lihlahisoa

GT-2188 Series Manual Pluse Jenereithara e nang le Konopo ea Emergency Stop Bakeng sa CNC Lathe le Mochini oa Khatiso, ho Finyella Tšebelisano ea Zero Kapa Karohano ea Letšoao.

tlhaloso e khuts'oane:

Lijenereithara tsa pulse (handwheel/mpg) hangata ke likonopo tse bilikang tse hlahisang matla a motlakase.Hangata li amahanngoa le mochine o laoloang ke nomoro ea k'homphieutha (CNC) kapa lisebelisoa tse ling tse amanang le boemo.


  • Boholo:210*88mm
  • Qeto:25ppr,100ppr
  • Phepelo ea Voltage:5v, 12v, 5-24v(+-10%)
  • Sephetho:Mokhanni oa Line, Output ea Voltage
  • Konopo ea Emergency Stop:Ee
  • Noble Button:Ee
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    GT-2088 Series Manual Pluse Jenereithara Bakeng sa CNC Lathe le Mochini oa Khatiso, ho Finyella Tšebelisano ea Zero Kapa Karohano ea Letšoao

    Ajenereithara ea pulse ka letsoho(MPG) ke sesebelisoa sa ho hlahisa li-pulses tsa motlakase (likhahla tse khutšoanyane tsa nako e tlaase) tsamaisong ea elektronike tlas'a taolo ea motho ea sebetsang (ka letsoho), ho fapana le li-pulses tse hlahisoang ke software.Li-MPG li sebelisoa lithulusing tsa mochini tse laoloang ke linomoro tsa khomphutha (CNC), ho li-microscopes tse ling, le lisebelisoa tse ling tse sebelisang ho beha likarolo ka nepo.MPG e tloaelehileng e na le kotola e potolohang e hlahisang li-pulse tse romelloang ho molaoli oa lisebelisoa.Mookameli o tla tsamaisa sekhechana sa sesebelisoa sebaka se reriloeng esale pele bakeng sa molumo o mong le o mong oa molumo.

    MPG ke sesebelisoa se tloaelehileng se fumanehang ho lisebelisoa tsa mochini oa CNC.Ke lebili la rotary le laoloang ka letsoho leo mokhanni oa mochini a le sebelisang ho tsamaisa sesebelisoa ka sekhahla ho latela axis.GT SERIES e fana ka maemo a 100 a boits'oaro a phetohelo ka 'ngoe 'me e fana ka potoloho e le 'ngoe ea A/B ea quadrature pulse cycle e le 'ngoe.Liphetho tsa quadrature li bolella mochini ka bobeli palo ea mehato e ntseng e eketseha ea ho tsamaea le ho ea tseleng.GT SERIES Ke ts'ebetso e hlakileng, maikutlo a tactile le bonolo ba sebopeho se loketse ho sebelisoa mefuteng eohle ea li-pendants tse rutang, li-control panel, li-motor drive, litsamaiso tsa taolo ea maemo le lisebelisoa tsa elektroniki.

    GT SERIES tlholeho ea bokahohle e tsoa ho sesebelisoa sa DIP se fihlellehang ho basebelisi se sebelisetsoang ho lokisa likhetho tse peli tsa phepelo ea motlakase (+5V kapa +12VDC) le likhetho tsa sehokelo sa A/B (ebang ke Standard 2K ohm kapa FANUC-mofuta oa 330 ohm pull-up resistors. ) Hape ke lebili la letsoho la pele le fanang ka sekema sa sejoale-joale, se sebetsang hantle sa khokahano ea indasteri se ipapisitseng le polaka e netefalitsoeng ea Phoenix Contact COMBICON screw-down wiring plug le pin header system.Sehlopha sa mosebetsi o boima se kenyelletsa ntlo ea tšepe, knob ea tšepe le IP50 e lekantsoeng (e sirelelitsoeng ka lerōle).

    GT-2088 manual pulse gererator Bulela konopo le E-stop konopo, ka likhetho tsa 25ppr le 100ppr, e ka sebetsa leGSK SYNTEC KND SIMENS MITSUBISH FANUC System.

    Mohlala: ADK2188

     Likaroloana:1.Gertech Hand Wheel e sebelisoa haholo ho CNC Lathe le Printing Mechanism, ho phethahatsa

    zero Tšebelisano kapa Karohano ea Lipontšo.

    2.Ho tšepahala ho phahameng, bophelo bo bolelele le bokhoni bo matla ba ho thibela ho kena-kenana, mocheso o pharaletseng bakeng sa ho sebetsa.

    3.Metal gear e tlisa, maikutlo a ka tšeptjoang le a hlakileng ha a potoloha;

    4.Sekoahelo sa polasetiki, Moqapi oa Setiiso oa Oli;

    GSK SYNTEC KND SIMENS MITSUBISH FANUC System

     

    Boholo

    210x88mm

    Qeto 100,25ppr
    Ho fana ka Voltage 5v, 12v, 24v(+-10%)
    Foromo ea tlhahiso Mokhanni oa Line, Output ea Voltage
    Tšebeliso e phahameng ea Hona Joale 80mA(Mohala) 120mA(V)
    Max.Khafetsa ea Karabo 10khz
    Nako ea ho phahama/hoetla 200ns(Mokhanni oa Line),1μs(Voltage)
    Boima bo kahare 1100g
    Nako ea ho sebetsa. -20 ℃-85 ℃
    Mongobo 30~85%
    Tekanyo ea Tšireletso IP50
    Likhetho tsa li-axles X,Y,Z,4 / XYZ 4 5 6
    Maemo a Kgodiso X1,X10, X100

    Mehato e mehlano e u tsebisa mokhoa oa ho khetha encoder ea hau:
    1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
    2.Haeba u batla ho fumana sekhouto bakeng sa ts'ebeliso ea hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
    3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e ntseng e eketseha) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
    5. Khetha ea matlo Dia le shaft dia.ea encoder;
    Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

     

    Sebaka sa Gertech Equivalent:
    Omron:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
    Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series

     

    Lintlha tsa Sephutheloana
    Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;

     

    LBH:
    1) U ka khetha encoder joang?
    Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
    Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
    2) Litlhaloso ke life reque/sted pele o laela encoder?
    Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
    Bophara ba ka Ntle———-Min 25mm, MAX 100mm
    Shaft Diameter————— Shaft e Min 4mm, Max shaft 45mm
    Mohato le Qeto———Min 20ppr, MAX 65536ppr
    Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
    Matla a Phepelo ea Matla——DC5V-30V
    3) U ka khetha encoder e nepahetseng joang u le mong?
    Hantle-ntle Tlhaloso
    Sheba The Installation Dimensions
    Ikopanye le Supplier ho fumana lintlha tse ling
    4) Ho qala likotoana tse kae?
    MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
    5) Hobaneng u khetha "Gertech” Brand Encoder?
    Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
    6) Nako ea hau ea ho etella pele e telele hakae?
    Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
    7) leano la hau la tiisetso ke eng?
    Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
    8) Melemo ke efe ha re ka ba setsi sa hau?
    Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
    9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
    Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
    10) Bokhoni ba hau ba tlhahiso ke bofe?
    Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha ​​​​mohala oa tlhahiso ea poleloana ea bobeli.


  • E fetileng:
  • E 'ngoe: